Gblock Ghislenghien Français Gblock Ghislenghien Néerlandais Gblock Ghislenghien Anglais Gblock Ghislenghien Espagnol 

La porte de votre sécurité
De deur van uw veiligheid
The door of your security
La puerta de vuestra seguridad

Series C-60

Resistance to fire 1 hour

The experience we have acquired from manufacturing and installing our doors has enabled us to create new generations of fire resistant doors – C Series.  This innovation in turn enables us to meet most requirements for 30-minute to 1-hour fire resistant doors.

The G-Block fire-guard doors can be single or double, and are constructed according to your request, as they are made to measure.  We can also include glazed sections, vents, peepholes, and various fixed or mobile sealing joints. 

Several possibilities of locks and assembling, always dry. 

The door is robust by design, and the materials used are relatively light for this type of door.

The most common locks for this Series are the WH - 113 with doble handel inox (fig 3).

Door Leaf

20160502091814.jpg

Standard leaf

Door with one or two steel leaves, with covering on three sides, ±60 mm in thickness, consisting of a solid, double-wall panel, made of two zinc plated steel sheets with a thickness of 15/10 per leaf.  The internal insulation consists of high density rock wool.


More...

Frame

20160502092117.jpg

U shaped

U shaped with wall head covering.

A frame that sandwiches the wall head will be used for most interior doors. The frame is made of zinc plated steel sheets with a thickness of 20/10. It is screwed to the bay with at least three screws per stile.
 
A 40 x 20 x 1.5 mm tubular strip is riveted onto the frame, and conceals the light that enters between the leaf and the frame on the non-hinged side.

More...

Locks

20170918112614.jpg

G-Block model E-10

Block lock and multi-point (on four sides) for european cylinder

  • European cylinder lock (10 teeth gear) and latch
  • Central deadbolt formed by a block of 40 x 60 x 13 mm
    • The stroke of this element is 40 mm, 1 turn
  • Movement mechanism for the top, back and bottom
  • Backset: 60 mm; case size: 85 mm; follower: 8 mm
  • Rounded front plate stainless steel 40/10, 25 x 260 mm
  • Strike plate non included
    • G-Block escutcheon assembly
  • Other possibilities from this central housing:
    • Mod. E-11 : an additional deviator mechanism at +/-700 mm to the top from the central housing, dead bolt of 25 x 60 x 13 mm, stroke 25 mm. And no bottom anchoring
    • Mod. E-12 : two additional deviators at +/-700 mm, one towards the top and one towards the bottom from the central housing, dead bolt of 25 x 60 x 13 mm, stroke 25 mm.
    • Mod. E-12.4 : two additional hook deviators at +/-700 mm, one towards the top and one towards the bottom from the central housing, an two at +/- 350 mm

20170918112528.jpg20170918112630.jpg20170926141400.jpg20170926141412.jpg
More...

20170918154154.jpg

Eskurra model 9040

Multi point lock (10 at the front side) for European cylinder

  • European cylinder lock (PZ - bit of 15) with reversible latch
  • Central deadbolt formed by 4 round steel bolts of Ø 16 mm, and two series of three cylindrical boltsof Ø 16 mm, at ± 645 mm towards the top and the bottom from the central housing
    • Total 10 round steel bolts
    • The stroke of this central element is 40 mm, 4 turns
  • Backset: 70 mm; case size: 85 mm; follower: 8 mm
  • U front plate stainless steel 25/10, 6+24+6 x 1910 mm
  • Strike plate non included
    • Eskurra escutcheon assembly

20170921105923.jpg
More...

20150812170136.jpg

Lock model 06, 07, or 08 (70b00)

Double bit key and latch lock with 4 anchoring and multi-point (on four sides)

  • Double bit key (BB) and reversible latch lock.
  • Central deadbolt formed by 4 anchoring points of Ø 18
    • The stroke of this element is 40 mm, 4 turn
  • Movement mechanism for the top, back and bottom
  • Backset: 65 mm; case size: 85 mm; follower: 8 mm
  • Square front plate 30/10, 35 x 400 mm
  • Strike plate non included
    • Eskurra escutcheon assembly

20150812170138.jpg
More...

20150812170133.jpg

Lock model EZ-700

European cylinder lock with 4 bolt and latch

  • European cylinder lock (PZ - bit of 15) with reversible latch
  • Central dead bolt formed by 4 anchoring points of Ø 14 mm.
    • The stroke of this element is 20 mm, 2 turns
  • Backset: 60 mm; case size: 85 mm; follower: 8 mm
  • Square front plate brass finish 30/10, 23 x 237 mm
  • Strike plate non included
    • Eskurra escutcheon assembly

20150812170134.jpg
More...

20170927111646.jpg

Eskurra model 4000

European cylinder lock with latch

  • European cylinder lock (PZ - bit of 15) with reversible latch
  • A central deadbolt of 20 x 55 x 8 mm
    • The stroke of this element is 20 mm, 2 turns
  • Backset: 60 mm; case size: 85 mm; follower: 8 mm
  • Square front plate brass finish 30/10, 23 x 235 mm
  • Strike plate non included

More...

20150812170104.jpg

Wink Haus model 113

European cylinder lock with latch

  • European cylinder lock (PZ - bit of 15) with reversible latch
  • A central deadbolt of 20 x 35 x 8 mm
    • The stroke of this element is 20 mm, 2 turns
  • Backset: 60 mm; case size: 72 mm; follower: 8 mm
  • Rounded front plate stainless steel 30/10, 20 x 235 mm
  • Strike plate non included
    • DIN hardware fitting

20150812170105.jpg
More...

Rotating element

20170926134039.jpg

Rotating parts

steel hinges

The leaves are suspended from the frame by means of at least two welded steel hinges with an exterior diameter of 20 mm, they are mounted on ball bearings for great inertia and can open up to 180°. They are moreover designed so that the axle cannot be driven out.

20160502092318.jpg20170926134648.jpg20170926134703.jpg
More...

Cylinders

20180718144406.jpg

Lince model C2 Z

Security Europrofile cylinder

  • European profile cylinder in brass, 5 pins and cross pins on 1 level.
  • Cross pins and springs in stainless steel.
  • Shell protected by 2 inserts in quenched steel and pins in treated stainless steel.
  • Rotors protected by 2 inserts in quenched steel.
  • The inserts are free so that they check the drilling.
  • 4 grooves in the mount of the rotor guide the key with precision and diminish the introduction of mock keys.
  • All these provisions provide a very high level of protection to attempts to force a door open without the authorised key.
  • Supplied with 5 keys as a standard.
  • You will find the dimensions available in the appended tables. For other measures, please consult us.
  • Nickel-plated finish.

20170502121926.jpg20170918171643.jpgdim C2Z_20180718143958.pdf
20170918170903.jpg

Lince cylinder with dual clutch

Cylinder with emergency exit function

A key can be introduced from one side of the cylinder when another key is already engaged in the opposite rotor.


20170918171340.jpg

Lince Mod. C3S "Selective access"

Simple and fully mechanical access control

The keys have a distinctive sign:

  • “Owner” keys have a blue colour chip.
  • “Service” keys have a yellow colour chip.
  • The locking key for “Service” keys has a red colour chip.
  • The unlocking key for “Service” keys has a green colour chip.

Instructions for use:

  • The “Owner” (blue) keys work in all cases.
  • The “Service” (yellow) keys work according to your needs.
  • To lock the cylinder so that the “Service” keys can no longer be used, insert the key with the red colour chip in the rotor and turn it once. The “Service” keys no longer work.
  • To unlock the cylinder so that the “Service” keys can be used again, insert the key with the green colour chip in the rotor and turn it once. The “Service” keys work.
  • Attention: the locking/unlocking of the cylinder must be carried out on either side when you wish to lock / unlock.

20150812171638.jpg20170918171359.jpgC3S_20180719080752.pdf
20170918171034.jpg

Lince knob cylinder

No keys on inside

  • For the front door, opened with a key from the outside, and by rotary knob on the inside.
  • The key turns the rotor, irrespective of the position of the knob; consequently, specially designed for front doors when the user tends to leave the key in the cylinder in semi-engaged position.
  • To be avoided on glazed doors.

20170918171020.jpg20170918171049.jpg20170918171105.jpg
More...

Cylinder protector

20150812171720.jpg

Cylinder protector model 420 P

Protection with hardened steel core

  • Protective rosette for European profile.
  • Central body in steel.
  • The body of the rosette has an opening for inserting the key in the cylinder.
  • Cannot be dismantled from the outside; fixed solidly through the door.
  • The finish of the body is black; that of the fitting is in brass or in stainless steel.
  • Cylinder protector available for lock L-35400, 21, 22, 23, EZ-700, EZ-9040 and EZ-9044.

20170918151648.jpg

Cylinder protector G-Block Mod. Al

 

Stainless steel protection mounted on armored plate.

  • Protective rosette for European profile mounted on an armoured plate.
  • Central body in stainless steel.
  • The body of the rosette has one opening, fitted with an anti-drilling rotating disc for inserting the key in the cylinder.
  • On the outside, the plate has a bolt and inside a latch.
  • Cannot be dismantled from the outside; fixed solidly through the door.
  • Stainless steel finish.
  • Cylinder protector available for most of DIN locks.

20150812171642.jpg20170918151711.jpg20170918151758.jpg
20170918210215.jpg

Cylinder protector G-Block model E

Stainless steel protection

  • Protective rosette for European profile.
  • Central body in steel.
  • The body of the rosette has an opening for inserting the key in the cylinder.
  • Two fixing brackets are used to fix the cylinder protector in the lock, which is its main characteristic.
  • Cannot be dismantled from the outside; fixed solidly through the door.
  • Stainless or golden finish.
  • Cylinder protector available for lock E-1 (10 - 11 - 12 - 12.4) or E-2 (20 - 21 - 22 - 23 -23.4).

20170918210344.jpg20170918210408.jpg20170918210431.jpg20180719165937.jpg20180719165947.jpg20180719165959.jpgProtegè CYLINDERE tot_20180719170018.pdf
20150812171643.jpg

Cylinder protector G-Block model AL-200400 K

Stainless steel protection

  • Protective rosette for European profile.
  • Central body in stainless steel.
  • The body of the rosette has one opening, fitted with an anti-drilling rotating disc for inserting the key in the cylinder.
  • Cannot be dismantled from the outside; fixed solidly through the door.
  • Stainless steel finish.
  • Cylinder protector available for DIN locks.

 

  • Access to buildings requires particular protection, in particular against acts of vandalism.
  • Extremely sturdy by design, the rosette model AL 200400 provides efficient protection against mechanical aggression.
  • Its sober and attractive design remains perennially fashionable.
  • These rosettes are therefore suitable for all types of applications such as for highly frequented places (public buildings, residential buildings, shops, etc.).
  • The rosettes of model AL200400 are subjected to continuous quality control and meet the requirements for security fittings according to DIN 18257.

20150812171645.jpg20150812171647.jpg
More...

Opening aid

20170918205532.jpg

Fitting Model E

Garniture laiton disponible pour serrure du type 0, 10 et 21

Latch

Brass fitting available for lock type 06, 07, 08, 10, 11, 12, 21, 22 and 23
Commercial name for the outside latch, Fig. 3.
Brass or nickel finish.

Knob

Fixed or mobile knob.
Fitting available for lock 06, 07, 08, 10, 11 and 12.
Commercial name for the knob atop the cylinder on the outside, Fig. 2, if the knob can be used as a latch; +Fig 2 fixed if the knob is fixed.
Brass or nickel finish.

Shield

Fitting available for lock 10, 11 and 12.
Commercial name for the shield, Fig. 1.
Brass or nickel finish.

Centre piece

Fitting available for all locks.
Brass or nickel finish.


20170918205616.jpg20170918205619.jpg20170918205701.jpg20170918205737.jpg20170918205824.jpg20170918205916.jpg
20150812171801.jpg

Stainless steel LMR latch and rosette

Minimalist and stainless steel aesthetic hardware


20150812171803.jpg20150812171805.jpg20150812171806.jpg20150812171807.jpg20150812171814.jpg20150812171816.jpg
More...