Gblock Ghislenghien Français Gblock Ghislenghien Néerlandais Gblock Ghislenghien Anglais Gblock Ghislenghien Espagnol 

La porte de votre sécurité
De deur van uw veiligheid
The door of your security
La puerta de vuestra seguridad

Series E class IV

Your peace of mind

This is the series on which we have always focused more attention as it is the basis for the development of all the other series. So our innovations are applied to it first. It represents the most widely sold structure of anti-burglar leaf. The most common locks for this Series are the E-10 and E-23 models. The hardware is fig. 2 fixed Nyckel finish (pulling on outer and inner latch plate).

Burglar resistance test according to EN 1627 Standards class IV and NFP 20-320 level 2 and NFP 23-306, acoustic insulation– 42 db; plus the application of most of our invention patents.

Door Leaf

20160502091814.jpg

Standard leaf

Door with one or two steel leaves, with covering on three sides, ±60 mm in thickness, consisting of a solid, double-wall panel, made of two zinc plated steel sheets with a thickness of 15/10 per leaf.  The internal insulation consists of high density rock wool.


20170925234255.jpg

Painting

All our doors at the exit of our workshops are pre-painted RAL 9010.

On demand we can paint in stuctured liquid "M" RAL to define

  • Primer painting in RAL 9010
  • RAL subject to the availability of our suppliers
  • If this door is exposed to the sun, we strongly advise against using a dark color

20170923215750.jpg

Wood

4 mm wood veneer and coverings 

4 mm wood veneer is obtained by cutting high quality wood in very thin layers, which are then glued and pressed on a particle board with a special glue.
 
Natural wood: sappelli, oak, beech, walnut, ockume, wenge, ... (according to the availability of our supplier).
 
Characteristics:
  • Two sides: a quality sheet on the face, lower quality sheet on the back
  • Medium density support
  • Natural beauty and nature of wood
  • Gross or varnished

20170923143029.jpg20170923143044.jpg20170923214701.jpg20170923214728.jpg20170923214748.jpg20170923214805.jpg
20170926000340.jpg

Wood imitation vinyl finish

All our doors at the exit of our workshops are pre-painted RAL 9010.

On request we can cover them with vinyl wood look or fantasy, to be defined.

For more informations on the possibilities : www.coverstyl.com/gamme-design-1-cover-en.html


More...

Frame

20160502092117.jpg

U shaped

U-shaped with wall head covering.

A frame that sandwiches the wall head will be used for most interior doors. The frame is made of zinc plated steel sheets with a thickness of 20/10. It is screwed to the bay with at least three screws per stile.
 
A 40 x 20 x 1.5 mm tubular strip is riveted onto the frame, and conceals the light that enters between the leaf and the frame on the non-hinged side.

20170425162007.jpg

Tubular frame

Tubular frame

When the wall has a door rabbet, the most suited solution is a tubular frame housed in the interior space of the bay. This type of frame is made of tube sections of minimum 60x60x3.
 
The strip is obtained from cold-bent, zincplated sheets and a 20/10 section.

More...

Locks

20170918112614.jpg

G-Block model E-10

Block and multipoint (on four sides) lock for European cylinder.

  • European cylinder lock (10 teeth gear) and latch
  • Central dead bolt made of a block of 40 x 60 x 13 mm
    • The stroke of this element is 40 mm, 1 turn
  • Deflection mechanism for the top, back and bottom
  • Backset: 60 mm; case size: 85 mm; follower: 8 mm
  • Rounded front stainless steel plate 40/10, 25 x 260 mm
  • Strike plate non included
    • G-Block escutcheon assembly
  • Other possibilities from this central housing:
    • Mod. E-11 : an additional deflection mechanism at +/-700 mm to the top from the central housing, dead bolt of 25 x 60 x 13 mm, stroke 25 mm. And no bottom anchoring.
    • Mod. E-12 : two additional deflection mechanisms at +/-700 mm, one towards the top and one towards the bottom from the central housing, dead bolt of 25 x 60 x 13 mm, stroke 25 mm.
    • Mod. E-12.4 : two additional hook deflection mechanisms at +/-700 mm, one towards the top and one towards the bottom from the central housing, and two at +/- 350 mm

20170918112528.jpg20170918112630.jpg20170926141400.jpg20170926141412.jpg
More...

20170918213842.jpg

G-Block model E-21

Lock with 4 anchoring and multi-point (on four sides) for European cylinder.

  • European cylinder lock (10 teeth gear) and latch
    • Latch locked by sensor when the leaf is slammed
  • Central dead bolt formed by 4 anchoring points of Ø 18
    • The stroke of this element is 40 mm, 1 turn
  • Deflection mechanism for the top, back and bottom
  • Backset: 90 mm; case size: 85 mm; follower: 8 mm
  • Square front stainless steel plate 40/10, 35 x 400 mm
  • Strike plate non included
    • G-Block escutcheon assembly
  • Other possibilities from this central housing:
    • Mod. E-22 : an additional hook deflector at +/-700 mm to the top from the central housing. And no bottom anchoring.
    • Mod. E-23 : two additional hook deflectors at +/-700 mm, one towards the top and one towards the bottom from the central housing.
    • Mod. E-23.4 : two additional hook deflectors at +/-700 mm, one towards the top and one towards the bottom from the central housing, and two at +/- 350 mm.

20170918213930.jpg
More...

Rotating element

20170926134039.jpg

Rotating parts

Steel hinges

The leaves are suspended from the frame by means of at least two welded steel hinges with an exterior diameter of 20 mm, they are mounted on ball bearings for great inertia and can open up to 180°. They are moreover designed so that the axle cannot be driven out.

20160502092318.jpg20170926134648.jpg20170926134703.jpg
More...

Cylinders

20170425164534.jpg

Lince model C5 W

High security Europrofile cylinder with resticted key duplication

  • Certified by the EN 1303:2006 standard in maximum grade.
  • Restricted key copying.
  • Anti-drilling devices: 1 pin in the body and 2 in the rotor, in case-hardened steel.
  • All tumblers, driver pins and springs are made of stainless steel.
  • More than 3 million combinations.
  • 5 thick nickel silver keys 3.5 mm.
  • Finishes: brushed brass and matt nickel.
  • Wide variety of sizes from 32 mm.
  • Property and security card.
  • Basic with 15 mm bit.

Options:

  • Available with button on the inside.
  • Available with disengageable function
  • 10 or 13 teeth gear, or bit of 13 mm.

20160616154750.jpg20170425164715.jpg20170425165159.jpgdim C5X_20180717163806.pdf
More...

Cylinder protector

20170918210215.jpg

Cylinder protector G-Block model E

Stainless steel protection

  • Protective rosette for European profile.
  • Central body in steel.
  • The body of the rosette has an opening for inserting the key in the cylinder.
  • Two fixing brackets are used to fix the cylinder protector in the lock, which is its main characteristic.
  • Cannot be dismantled from the outside; fixed solidly through the door.
  • Stainless or golden finish.
  • Cylinder protector available for lock E-1 (10 - 11 - 12 - 12.4) or E-2 (20 - 21 - 22 - 23 -23.4).

20170918210344.jpg20170918210408.jpg20170918210431.jpg20180719165937.jpg20180719165947.jpg20180719165959.jpgProtegè CYLINDERE tot_20180719170018.pdf
More...

Opening aid

20170918205532.jpg

Fitting Model E

Brass fitting available for lock type 0, 10 and 21

Latch

Brass fitting available for lock type 06, 07, 08, 10, 11, 12, 21, 22 and 23
Commercial name for the outside latch, Fig. 3.
Brass or nickel finish.

Knob

Fixed or mobile knob.
Fitting available for lock 06, 07, 08, 10, 11 and 12.
Commercial name for the knob atop the cylinder on the outside, Fig. 2, if the knob can be used as a latch; +Fig 2 fixed if the knob is fixed.
Brass or nickel finish.

Shield

Fitting available for lock 10, 11 and 12.
Commercial name for the shield, Fig. 1.
Brass or nickel finish.

Centre piece

Fitting available for all locks.
Brass or nickel finish.


20170918205616.jpg20170918205619.jpg20170918205701.jpg20170918205737.jpg20170918205824.jpg20170918205916.jpg
More...

Watch

20180724151116.jpg

Peephole

See without being seen.

Micro-viewer placed in the door.

  • Enables the viewer to see who is outside the door without being seen.
  • The angle of vision must be at least 180° to offer the best possible view of what is outside.

Operating principle:

  • The peephole consists of a tube with optical elements that enlarge the visual representation on the other side of the tube.
  • This visualisation is optimised only in the viewing direction.

20180724150727.jpg
More...

Draught proof

20180725071252.jpg

Seals for doors and drop down seals with dual adju

Seals for doors and drop down seals with dual adjustment

Seals for doors

  • PE – Thermoplastic elastomer in compact material with mechanical and thermal properties. This material resists ageing, bad weather, extreme temperatures, UV rays and the ozone; can be used in all areas of construction.
  • Instructions
    • To be glued on the leaf.
    • Clean well the surface on which it will be affixed to ensure flawless adhesion.
  • Packaging
    • Per 50-metre roll.

Drop down seals

  • Double-adjustment seal. (Height – tilt)
  • Omega-shaped section
  • Mobile part fitted with a sealing joint.
  • Command button of the mechanism in brass, hexagonal shape, with slot for adjustment.
  • Tilt adjusting screw in brass with slot for adjustment.
  • Two return springs.
  • EPDM (ethylene propylene diene M-class rubber) joint
  • Standard lengths in cm:
    • 43, 53, 63, 73, 83, 93, 103, 113, 123, 133.
    • Maximum authorised cut length: 10 cm.

20170918215115.jpg20180725071323.jpg
More...