Gblock Ghislenghien Français Gblock Ghislenghien Néerlandais Gblock Ghislenghien Anglais Gblock Ghislenghien Espagnol 

La porte de votre sécuritéDe deur van uw veiligheidThe door of your securityLa puerta de vuestra seguridad

Basic doors
Series I Basic

Steel doors of simple and light design, adaptable to all types of construction.

Sound attenuation by the CSTC that meets the EN ISO 140-3 and 717-1 standards Rw = 42 dB.

The most common locks for this series are the WH 113, along with double latch stainless steel hardware.

Door Leaf


Standard leaf

Door with one or two steel leaves, with covering on three sides, ±60 mm in thickness, consisting of a solid, double-wall panel, made of two zinc plated steel sheets with a thickness of 15/10 per leaf.  The internal insulation consists of high density rock wool.



All our doors at the exit of our workshops are pre-painted RAL 9010.

On demand we can paint in stuctured liquid "M" RAL to define

  • Primer painting in RAL 9010
  • RAL subject to the availability of our suppliers
  • If this door is exposed to the sun, we strongly advise against using a dark color


Wood imitation vinyl finish

All our doors at the exit of our workshops are pre-painted RAL 9010.

On request we can cover them with vinyl wood look or fantasy, to be defined.

For more informations on the possibilities :




U shaped

U-shaped with wall head covering.

A frame that sandwiches the wall head will be used for most interior doors. The frame is made of zinc plated steel sheets with a thickness of 20/10. It is screwed to the bay with at least three screws per stile.
A 40 x 20 x 1.5 mm tubular strip is riveted onto the frame, and conceals the light that enters between the leaf and the frame on the non-hinged side.


Tubular frame

Tubular frame

When the wall has a door rabbet, the most suited solution is a tubular frame housed in the interior space of the bay. This type of frame is made of tube sections of minimum 60x60x3.
The strip is obtained from cold-bent, zincplated sheets and a 20/10 section.




Wink Haus model 113

European cylinder lock with latch

  • European cylinder lock (PZ - bit of 15) with reversible latch
  • A central dead bolt of 20 x 35 x 8 mm
    • The stroke of this element is 20 mm, 2 turns
  • Backset: 60 mm; case size: 72 mm; follower: 8 mm
  • Rounded front plate stainless steel 30/10, 20 x 235 mm
  • Strike plate non included
    • DIN hardware fitting


Rotating element


Rotating parts

Steel hinges

The leaves are suspended from the frame by means of at least two welded steel hinges with an exterior diameter of 20 mm, they are mounted on ball bearings for great inertia and can open up to 180°. They are moreover designed so that the axle cannot be driven out.




Lince model C2 Z

Security Europrofile cylinder

  • European profile cylinder in brass, 5 pins and cross pins on 1 level.
  • Cross pins and springs in stainless steel.
  • Shell protected by 2 inserts in quenched steel and pins in treated stainless steel.
  • Rotors protected by 2 inserts in quenched steel.
  • The inserts are free so that they check the drilling.
  • 4 grooves in the mount of the rotor guide the key with precision and diminish the introduction of mock keys.
  • All these provisions provide a very high level of protection to attempts to force a door open without the authorised key.
  • Supplied with 5 keys as a standard.
  • You will find the dimensions available in the appended tables. For other measures, please consult us.
  • Nickel-plated finish.

20170502121926.jpg20170918171643.jpgdim C2Z_20180718143958.pdf

Opening aid


Stainless steel LMR latch and rosette

Minimalist and stainless steel aesthetic hardware