Basic doors: Series 0 Cellar

The most common locks for this series are the locks 05 double-bit key with the hardware - fig. 3 stainless steel finish (latch / latch).

Door Leaf

Standard leaf

Door with one or two steel leaves, with covering on three sides, ±60 mm in thickness, consisting of a solid, double-wall panel, made of two zinc plated steel sheets with a thickness of 15/10 per leaf. The internal insulation consists of high density rock wool.

Painting

All our doors at the exit of our workshops are pre-painted RAL 9010.

On demand we can paint in stuctured liquid "M" RAL to define

Primer painting in RAL 9010
RAL subject to the availability of our suppliers
If this door is exposed to the sun, we strongly advise against using a dark color

More...

Frame

U shaped

U-shaped with wall head covering.

A frame that sandwiches the wall head will be used for most interior doors. The frame is made of zinc plated steel sheets with a thickness of 20/10. It is screwed to the bay with at least three screws per stile.

A 40 x 20 x 1.5 mm tubular strip is riveted onto the frame, and conceals the light that enters between the leaf and the frame on the non-hinged side.

Tubular frame

When the wall has a door rabbet, the most suited solution is a tubular frame housed in the interior space of the bay. This type of frame is made of tube sections of minimum 60x60x3.

The strip is obtained from cold-bent, zincplated sheets and a 20/10 section.

More...

Rotating element

Rotating parts

Steel hinges

The leaves are suspended from the frame by means of at least two welded steel hinges with an exterior diameter of 20 mm, they are mounted on ball bearings for great inertia and can open up to 180°. They are moreover designed so that the axle cannot be driven out.

More...

Series 0

Cisa model 06 - Cambio Facile

Cambio Facile rekeyable lock

Double bit key (BB) and reversible latch lock.
Central dead bolt made of 4 anchoring points of Ø 18 mm.
- The stroke of this element is 20 mm, in 2 turns
Supplied with a kit of 5 double bit keys as a standard
Backset: 67.5 mm; case size: 85 mm; follower: 8 mm
Square front plate 30/10, 35 x 350
Strike plate non included
- DIN hardware fitting